# Gas Oven Not Heating but the Burners Work? 7 Checks Before Thanksgiving

> Gas oven not heating but the burners work? Check settings, the door lock, the gas regulator, power, and the igniter glow, using GE and Whirlpool's own steps.

- URL: https://applianceinsider.org/blog/gas-oven-not-heating-but-burners-work/
- Publisher: Appliance Insider (https://applianceinsider.org)
- Category: Repair Guides; Appliance: Ranges & Ovens; Brands: GE, Whirlpool
- Published: 2026-11-01; Last updated: 2026-11-01; Author: Morgan Hale

A gas oven not heating while the burners work usually comes down to a setting, a power problem, the gas supply to the oven, or the oven igniter. GE Appliances says the first things to check are the Bake or Broil setting, the self-clean door lock, the knob positions and, on new installs, the range's gas regulator lever. If those are fine, the red-glow igniter test tells you whether you can keep troubleshooting or need a technician.

The checks below come from GE's and Whirlpool's own support pages and run from easiest to hardest. They apply to most gas and dual-fuel ranges, but controls, igniter types and part locations vary by model, so keep your owner's manual handy. With Thanksgiving on Nov. 26, test your oven now rather than the morning of.

> **Warning:**
> **If you smell gas, stop.** Don't light anything, don't switch lights or appliances on or off, and don't use a phone inside. Leave the home and call 911 and your gas utility's emergency line from a safe place. GE says to unplug the range before any maintenance or cleaning. Never adjust, repair or replace gas valves, regulators or lines yourself.

## Quick diagnosis: what is your oven doing?

| What you notice | Most likely cause | Go to |
| --- | --- | --- |
| Nothing happens; display or settings look off | Wrong mode, open door or locked door | Check 1 |
| Oven and display are dead | No power: breaker, outlet or adapter | Check 2 |
| New install: burners work, oven doesn't | Gas valve off, air in the line, or regulator lever off | Checks 3 to 5 |
| No red glow inside the oven when it's on | Igniter, control or other electrical part | Check 6 |
| Oven heats but never reaches the set temperature | Sensor out of position or calibration off | Check 7 |

## Check 1: Settings, the door and the knobs

Start with what you can see:

1. Confirm the oven is set to **Bake** or **Broil**, as GE recommends.
2. Close the door all the way. Whirlpool notes that on many models the oven won't heat with the door open, and the broiler shuts off as soon as the door opens during broiling.
3. On self-cleaning ranges, make sure the door is **unlocked**. GE lists a door left in the locked position as a cause of an oven that won't heat.
4. If you pulled the knobs off to clean the range, check that each went back on its own shaft. GE points out that ranges with separate oven temperature and oven function knobs won't work correctly if the knobs were swapped.

## Check 2: Power to the range

A gas oven still needs electricity. Whirlpool says the oven igniter depends on a good ground path, so the range must be plugged into a **grounded, working 120-volt outlet**, never through a two-prong adapter or an extension cord.

1. Check the breaker for the range. If it tripped, reset it.
2. Turn the oven on. Whirlpool says that if this trips the breaker again, you need a professional.
3. If you're not sure the outlet works, Whirlpool suggests plugging in a small appliance you know works, with a similar cord. If the outlet is dead or you can't tell whether it's grounded, call a qualified electrician.

## Check 3: The main gas valve

Whirlpool says the gas shutoff is usually on the branch pipe right after it comes through the wall or floor behind the range. Make sure it's turned **ON**. If someone recently moved the range to clean or to work on the floor, this is worth a look. If the valve is on and the oven still won't heat, Whirlpool recommends an inspection by a licensed professional.

## Check 4: Air in the gas line after an install

If the range was just installed or reconnected to the gas supply, air can be trapped in the line. Whirlpool's fix is simple: turn on any surface burner to let the air out, then try the oven again.

## Check 5: The range's gas regulator (new installs)

This is the classic "burners work, oven doesn't" cause on a brand-new range. GE says ranges usually ship with the main gas regulator set to ON, but if it gets jarred during installation the lever can spring to OFF. The top burners keep working with the regulator off, but the oven won't.

GE also notes the lever may not be easy to see, and that service may be needed to reset it. Don't take the range apart or force the regulator; if you can't plainly see the lever, call the installer or a technician.

## Check 6: The igniter glow test

Most modern gas ovens light with a hot surface igniter, which GE calls the Glo-Bar. To check it:

1. Turn the oven on to Bake.
2. Open the oven door and look toward the burner area for a **red glow**.
3. If you see no glow, GE says there may be a problem with the Glo-Bar, the on/off control or other electrical components.

Whirlpool says a stovetop that works while the oven doesn't can point to the oven igniter. It may only be dirty, so clean it only as your appliance care guide describes, and contact a service professional if it needs repair. A technician should diagnose a suspected igniter problem; don't buy and swap parts on a guess. Don't try to light a modern oven by hand; Whirlpool says only some older models use a pilot flame, and your manual is the authority there.

## Check 7: The temperature sensor and the real temperature

If the oven lights but never gets hot enough, check temperature rather than ignition:

1. With the oven off and cool, find the temperature sensor, a thin tube usually at the back of the oven. Whirlpool says it should sit at a **90-degree angle** to the back wall. If it's been bumped, carefully move it back into place.
2. Put an oven thermometer on the center rack and preheat.
3. When preheating ends, compare the reading to the set temperature. Whirlpool says you can calibrate the oven if it's off by **15 degrees F (about 8 degrees C) or more**; your manual has the steps for your model.
4. If it's off by **100 degrees F (about 56 degrees C) or more**, Whirlpool says to call a professional rather than calibrating it yourself.

Also confirm the display isn't set to Celsius when you meant Fahrenheit, which Whirlpool flags as a setting to check.

## When it's probably not a DIY fix

Stop and schedule service if:

- There's no red glow in Check 6 and power, settings and the gas valve all check out.
- The breaker trips again as soon as you turn the range on.
- The range is newly installed and you can't see the regulator lever.
- The oven is off by 100 degrees F or more.
- The display shows an error code. Our [GE and Whirlpool oven error codes guide](https://applianceinsider.org/blog/ge-whirlpool-oven-error-codes/) explains what F2, F3, F9 and similar codes mean.
- You smell gas at any point. Leave the home and call your gas utility.

GE's last word on this symptom is plain: if these checks don't help, you'll likely need service.

## Related reading

- Electric range instead? Start with [electric oven not heating: 7 checks before you call a technician](https://applianceinsider.org/blog/electric-oven-not-heating-7-checks-before-you-call-a-technician/).
- Burners clicking but not lighting? See [gas stove burner clicking but won't light](https://applianceinsider.org/blog/gas-stove-burner-clicking-but-wont-light/).
- Getting ready to host? Read [how to clean your oven before the holidays](https://applianceinsider.org/blog/how-to-clean-your-oven-before-the-holidays/), and leave time to test the oven afterward.
- Browse more [range and oven guides](https://applianceinsider.org/appliances/range-oven/).

## Step-by-step summary

Estimated time: 30m

Tools: Oven thermometer, Flashlight

1. **Check the mode, the door and the knobs.** Make sure the oven is set to Bake or Broil, the door is closed all the way, the self-clean door lock is released, and any knobs removed for cleaning went back in their correct spots.
2. **Check the power supply.** Confirm the range is plugged into a grounded 120-volt outlet with no two-prong adapter or extension cord, and reset a tripped breaker. If the breaker trips again when you turn the range on, call a professional.
3. **Check the main gas valve.** Make sure the shutoff valve on the gas pipe behind the range, usually just past where the pipe comes through the wall or floor, is turned ON.
4. **Purge air after a new install.** If the range was just installed or reconnected, light a surface burner to release air trapped in the gas line, then try the oven again.
5. **Rule out the range's gas regulator on new installs.** GE says the regulator lever can be bumped OFF during installation, which leaves the burners working but the oven dead. If you can't see or reach the lever, have a technician reset it.
6. **Look for the igniter glow.** Turn the oven on, open the door and look for a red glow from the igniter. If there's no glow, GE says the igniter, the control or another electrical part may have failed, which needs service.
7. **Check the temperature sensor and the real temperature.** Make sure the thin sensor tube at the back sits at a 90-degree angle to the back wall, then preheat with an oven thermometer on the center rack. Calibrate if it's off by 15 degrees F or more; call a pro if it's off by 100 degrees F or more.

## Frequently asked questions

**Q: Why does my gas stove work but not my oven?**

A: The burners and the oven use separate parts, so one can fail without the other. GE says a gas regulator lever bumped to OFF during installation lets the burners work while the oven won't, and Whirlpool says a working stovetop with a dead oven can also point to the oven igniter.

**Q: How do I know if my gas oven igniter is bad?**

A: GE's test is to turn the oven on, open the door and look for a red glow from the igniter. If there's no glow, the igniter, the control or another electrical part may be faulty, and a technician should diagnose it.

**Q: Does a gas oven need electricity to heat?**

A: Yes, most modern gas ovens do. Whirlpool says the igniters depend on a grounded 120-volt outlet, so a tripped breaker, a dead outlet, a two-prong adapter or an extension cord can stop the oven from lighting.

**Q: Why is my gas oven not getting hot enough?**

A: Check the real temperature with an oven thermometer on the center rack after preheating. Whirlpool says you can calibrate the oven if it's off by 15 degrees F or more, but should call a professional if it's off by 100 degrees F or more.

**Q: Can I light a gas oven manually if the igniter fails?**

A: Whirlpool says modern gas ovens typically use an igniter, while some older models have a pilot flame, and that you should follow your owner's manual or call for service. Don't try to light a modern oven by hand.

## When to call a pro

For repairs beyond basic checks in Maryland, Virginia, Washington D.C., West Virginia, Pennsylvania, Delaware, North Carolina, South Carolina, and Georgia, Appliance Insider recommends [VIA Appliance](https://viaappliance.com/?utm_source=applianceinsider&utm_medium=referral&utm_campaign=call-a-pro&utm_content=post-gas-oven-not-heating-but-burners-work) (book online: https://viaappliance.com/?utm_source=applianceinsider&utm_medium=referral&utm_campaign=call-a-pro&utm_content=post-gas-oven-not-heating-but-burners-work#book). VIA Appliance is a featured repair partner of Appliance Insider.

## Sources

- [GE Appliances: Gas Range - Oven Does Not Heat, But The Burners Heat](https://products.geappliances.com/appliance/gea-support-search-content?contentId=38007)
- [Whirlpool Product Help: Oven Not Working - Gas and Dual Fuel Range](https://producthelp.whirlpool.com/Cooking/Wall_Ovens_and_Ranges/Ranges/Oven_Concerns/Oven_Not_Working/Gas_Oven/Oven_Not_Working_-_Gas_and_Dual_Fuel_Range)
- [Whirlpool: What to Do If Your Gas Oven Is Not Heating](https://www.whirlpool.com/blog/kitchen/gas-oven-not-heating.html)
- [Washington Gas: Natural Gas Safety (what to do if you smell gas)](https://www.washingtongas.com/safety)
