Comparisons All Appliances

Eufy Omni S2 Pro (T210T) vs. Omni S2 (T2081): Is UV-C Worth $400 More?

Eufy Omni S2 Pro vs. Omni S2: the Pro adds UV-C floor lights, 40,000 Pa suction, and hot-water mopping. Specs, prices, and which one to buy.

Eufy Omni S2 Pro in graphite and eufy Omni S2 in champagne with their tall docking stations, side by side on light oak floors

In the eufy Omni S2 Pro vs. Omni S2 decision, most people should buy the Omni S2 (T2081), especially while eufy.com has it at $1,299.99, $400 less than the new S2 Pro. Buy the Omni S2 Pro (T210T) if floor hygiene is the whole point, say a crawling baby, pets, or allergies at home, because it adds UV-C lights under the robot, hot-water mopping, a hotter mop wash, and 40,000 Pa of rated suction. Both robots share the same body size, roller-mop width, station footprint, and electrolyzed-water mopping system.

This is a research-based comparison built from Anker’s launch release, eufy’s own product pages and FAQ, and launch coverage. We haven’t tested either robot, and the S2 Pro is too new for any owner track record.

What’s new in the eufy Omni S2 Pro

Anker announced the Omni S2 Pro on Nov. 2, 2026, at $1,699.99 on eufy.com and Amazon. The Verge reported it on Nov. 1, so “early November” is the safest launch date. It’s a mid-cycle upgrade to the Omni S2, which debuted at CES 2026 about 10 months earlier.

Anker’s headline claim is that the S2 Pro is the first robot vacuum to pair UV-C light with electrolyzed water. Eufy’s own S2 Pro vs. S2 FAQ lists every change, and it’s a longer list than the UV-C lights alone:

  • UV-C floor lights: six LEDs under the robot, 270 to 280 nm (Anker’s release says a 275 nm peak), each with a 120-degree beam.
  • Suction: peak rated suction up from 30,000 Pa to 40,000 Pa. Airflow stays at 100 AW on both.
  • Mopping: HydroJet 3.0 adds 131°F (55°C) hot-water mopping and raises mop pressure from 15 N to 16 N.
  • Station: mop washing up from 140°F (60°C) to 212°F (100°C), plus a PHMB-treated antibacterial dust bag and filter.
  • Obstacles and edges: 360+ recognized object types instead of 200+, and two edge-detecting line lasers instead of one.
  • Thresholds: two-step thresholds up to 2.76 inches instead of 1.65 inches.

Prices on eufy.com as of Nov. 3, 2026:

Omni S2 Pro (T210T)Omni S2 (T2081)
List price$1,699.99$1,599.99
eufy.com price on Nov. 3$1,699.99$1,299.99 ($300 off)
Gap$400 now, $100 at list

Eufy hasn’t said when the S2’s discount ends, and robot vacuum prices move a lot in November, so check the current price before you order.

Side-by-side specs compared

Figures come from Anker’s release and eufy’s US, Canadian, and European product pages. Suction, disinfection, and obstacle numbers are eufy’s own lab claims.

SpecOmni S2 Pro (T210T)Omni S2 (T2081)
Peak rated suction40,000 Pa, 100 AW30,000 Pa, 100 AW
FiltrationAeroTurbo 3.0 multi-cyclone, PHMB antibacterial filterAeroTurbo 2.0 multi-cyclone
UV-C floor lightsSix LEDs, 270-280 nmNone
Electrolyzed waterYesYes
Roller mopHydroJet 3.0, 11.4 in, 16 NHydroJet 2.0, 11.4 in, 15 N
Hot-water mopping131°F (55°C)No
Mop extension at edgesUp to 0.59 inUp to 0.59 in
Station mop wash / dry212°F wash, 131°F dry140°F wash, 131°F dry
Obstacle recognition360+ types, 3D ToF and RGB200+ types, 3D ToF and RGB
Edge lasersTwoOne
Single / double threshold1.38 in / 2.76 in1.38 in / 1.65 in
Climbs onto carpet up to1.38 in thickAbout 1.97 in thick
Robot size12.8 x 14.1 x 3.9 in12.8 x 14.1 x 3.9 in (326 x 358 x 98 mm)
Station size15.2 x 18.7 x 26.4 in15.2 x 18.7 x 26.4 in (387 x 476 x 670 mm)
Allergy certificationAAFA Asthma & Allergy Friendly (per Anker)Not listed

Two lines in that table favor the older model. Eufy’s own FAQ says the Omni S2 climbs onto thicker carpets (up to 1.97 inches versus 1.38 inches), and that the S2’s station detects dirty water and rewashes the mop when needed, a feature eufy doesn’t list for the Pro.

What UV-C on a robot vacuum can and can’t do

Eufy says UV-C combined with electrolyzed water kills 99.99% of bacteria on floors, in testing by TÜV and SGS. Anker’s release adds that the system reached 99.99% against E. coli, S. aureus, influenza virus, and Aspergillus niger mold in lab testing. Those are the company’s own results under lab conditions, not independent home testing.

UV-C itself is a well-established disinfection method, but it has limits that matter on a moving robot. The International Ultraviolet Association explains that the dose a surface gets is the light’s intensity multiplied by exposure time, and that UV works only on surfaces in direct line of sight. Grout lines, textured tile, and anything under crumbs or a sticky spill get less light or none. A robot that keeps moving also gives each patch of floor only a brief exposure.

Eufy hasn’t published the UV-C intensity at floor level or how long each spot is exposed, so there’s no way to judge the dose on your floors. The practical reading: the UV-C pass is an extra layer on top of the electrolyzed-water mopping that both robots already do, not a replacement for it. On carpet, the lights only reach the surface of the fibers.

Two setup details from eufy’s FAQ are easy to miss:

  • UV Cleaning is off unless you turn it on. Enable it in the app’s cleaning panel, and separately for each scheduled or saved task. The light ring on top of the robot cycles purple while it’s running, and cleaning history shows whether UV was used.
  • The lights shut off when the robot is lifted or turned over. Anker says the LEDs use no mercury and keep their emissions within the cleaning path.

Vacuuming, carpet, and pet hair

On paper the S2 Pro is the stronger vacuum: 40,000 Pa of peak rated suction versus 30,000 Pa, with the same 100 AW of airflow. Anker says the S2 Pro’s five-layer filtration traps particles down to 0.3 micron and that it keeps 97% of its suction after 365 days of use. Both robots lift their roller mop on carpet and boost suction there when BoostIQ is on.

The catch is thick rugs. The S2 Pro avoids carpets thicker than 1.38 inches and long-pile rugs with fibers over 1.18 inches, per eufy. The S2 can climb onto carpet up to about 1.97 inches thick. If deep rugs are a big part of your home, the cheaper model is the better fit, and the extra suction on the Pro doesn’t help on a rug it won’t climb onto.

Reliability and repairability

The Omni S2 has been on sale since early 2026, so it has a longer record, while the S2 Pro launched in November and has none. There are no recalls or service bulletins for either model as of Nov. 3, 2026.

A few practical points:

  • Same footprint, different station internals. Both stations measure 15.2 x 18.7 x 26.4 inches, according to eufy. The Pro’s station heats mop water to 212°F, so expect it to work harder, and keep the area around it clear.
  • More parts on the Pro. Six UV-C LEDs and a second edge laser are extra components the S2 doesn’t have. Wipe the sensors and laser windows regularly, as eufy’s FAQ recommends for both robots.
  • Consumables. Eufy already sells S2 dust bags, roller brushes, filters, and batteries on its US store. Eufy hasn’t said which S2 parts also fit the S2 Pro, so don’t assume they swap.
  • Warranty. The US pages we checked don’t state the warranty term for either model. Ask eufy before you buy.

For upkeep that applies to any robot vacuum, such as emptying the dust bag and cleaning sensors, see the maintenance calendar.

Installation and fit

Both stations are tall at 26.4 inches, so check the spot under a shelf or counter before you order. Put the station near an outlet on a hard, level floor with room in front for the robot to dock. The Omni S2 has an optional eufy kit that connects the station to a water supply and drain. Eufy hasn’t listed one for the S2 Pro yet.

Measure under your furniture too. Both robots are about 3.9 inches tall, and eufy says the S2 Pro won’t go under furniture with less than about 4.25 inches of clearance in its standard setting (about 4.13 inches in Exploration Mode). The Omni S2 needs app control over 2.4 GHz Wi-Fi.

Choose the Omni S2 Pro (T210T) if…

  • You have a crawling baby, pets, or allergy-prone family members and want the UV-C pass on top of electrolyzed-water mopping.
  • Greasy kitchen floors are a daily problem, where 131°F mop water and a 212°F mop wash help most.
  • Your home has tall double thresholds (between 1.65 and 2.76 inches) that the S2 can’t cross.
  • You’d pay $400 more today for the newest model, or you’re buying when the gap closes back toward $100.

Choose the Omni S2 (T2081) if…

  • You want flagship mopping with electrolyzed water and the same body and station size for $400 less on eufy.com right now.
  • You have thick rugs between 1.38 and about 2 inches, which the S2 climbs and the Pro avoids.
  • You’d rather buy a model that’s been on the market most of the year.
  • You want the optional auto-refill and drain hookup eufy already sells for the S2.

Bottom line

The Omni S2 Pro is a real upgrade, but most of its gains are about hygiene rather than everyday cleaning: UV-C lights, hotter water, and a hotter mop wash. At a $400 gap, the Omni S2 is the better value for most homes, since it already mops with electrolyzed water. If the gap shrinks or floor disinfection is your top reason for buying, the S2 Pro is the one to get. For a cheaper eufy pair, see our eufy Omni C30 Edge vs. Omni C30 comparison, and for other roller-mop flagships, our Roborock Saros 20 Sonic vs. Saros 20 Flow comparison and the Dyson Nurovi R1, R2, and R3. More head-to-heads are in Comparisons.

Tools and supplies mentioned

eufy Omni S2 Pro (T210T) Robot Vacuum and Mop

by eufy

The new flagship: UV-C floor lights plus electrolyzed-water mopping, 40,000 Pa rated peak suction, HydroJet 3.0 hot-water roller mop, and a station that washes the mop at 212°F. Research-based comparison, not a hands-on review.

Fit check: UV Cleaning must be switched on in the eufy app. Climbs onto carpets up to 1.38 in thick. Check the delivery date before you order; it's a brand-new listing.

Check price on Amazon

eufy Omni S2 (T2081) Robot Vacuum and Mop

by eufy

The original S2: 30,000 Pa rated suction, electrolyzed-water mopping with a HydroJet 2.0 roller mop, and a self-emptying, self-washing station. Research-based comparison, not a hands-on review.

Fit check: Requires 2.4 GHz Wi-Fi for app control. An optional eufy kit connects the station to a water supply and drain.

Check price on Amazon

Frequently asked questions

What is the difference between the eufy Omni S2 Pro and the Omni S2?

The Omni S2 Pro adds six UV-C LEDs under the robot, raises peak suction from 30,000 Pa to 40,000 Pa, mops with 131°F (55°C) water, and washes its roller mop at 212°F (100°C) instead of 140°F (60°C). It also recognizes 360+ obstacle types instead of 200+ and climbs two-step thresholds up to 2.76 inches instead of 1.65 inches. The robot body, 11.4-inch roller mop size, and station footprint are the same.

Is the eufy Omni S2 Pro worth it over the Omni S2?

For most homes, no. The Omni S2 already mops with electrolyzed water and has the same body and station size. The S2 Pro makes sense if you have a crawling baby, pets, or allergy concerns and want the UV-C pass, hotter mop washing, and stronger rated suction, or if your home has tall double thresholds the S2 can't climb.

Does the eufy Omni S2 Pro UV-C light turn on automatically?

No. Eufy says you have to enable UV Cleaning in the app's cleaning panel, and turn it on separately for scheduled or saved tasks. When it's running, the light ring on top of the robot shows a cycling purple pattern, and the UV LEDs shut off if the robot is lifted or turned over.

When did the eufy Omni S2 Pro come out and how much is it?

Anker announced the eufy Omni S2 Pro on Nov. 2, 2026, at $1,699.99, sold on eufy.com and Amazon. The original Omni S2 debuted at CES in January 2026 with a $1,599.99 list price, and eufy.com showed it at $1,299.99 on Nov. 3, 2026.

Can the eufy Omni S2 Pro clean thick carpet?

Only up to a point. Eufy says the S2 Pro climbs onto carpets up to 1.38 inches thick and avoids thicker or long-pile rugs, while the older Omni S2 can climb onto carpets up to about 1.97 inches. If you have deep shag rugs, the cheaper S2 handles them better on paper.

Sources

eufyOmni S2 ProOmni S2T210TT2081robot vacuumrobot mopUV-Crobot vacuum comparison

Found an error? We correct mistakes promptly. See our corrections policy.